Bob Dale Work Gloves Baker Pro Tools

Lamps/Bulbs

  • Print

 

Pure LED

 

HUNZA offers a comprehensive range of high output LED options for all Luminaires except SafeTouch.

LED’s are very energy efficient and have a significantly low heat output. They are ideal for installation in difficult-to-access places due to their exceptionally long operational life, ensuring minimal maintenance is required to keep them operational. They are also ideal for public spaces where low heat surfaces are important.

Dedicated LED – HUNZA offer a dedicated LED system as an option for our MR16 luminaires using an integrated Cree LED array. This system has the advantage of a very long diode life and high light output.

Plug In LED – MR16, MR11 and G4 bi–pin plug in LED lamps are also available and can be easily fitted into most HUNZA luminaires.

 

 

Philips CDM Metal Halide Lamp (Master Colour CDM)

 

Ceramic Discharge Metal Halide (CDM) is one of the two key High Intensity Discharge (HID) lamp type options available for the HUNZA Architectural Series ST150 and ST50 luminaires. These lamps are supplied in a range of wattages from 20W to 150W.

Philips Master Colour CDM lamps are a range of single-ended, compact, high efficiency discharge lamps with a stable temperature over lifetime and a crisp, sparkling light.

The G12 and PGJ5 lamps do not have an integral reflector so this is supplied as part of the HUNZA™ ST Luminaire, with a range of beam angles from 12 to 60 degrees, depending on model. This type of lamp/reflector system provides both versatility and economy as the reflector is not replaced at each lamp change.

For the ST150, there is a further lamp option with an integral reflector – the GX8.5 111 CDM, available in 35 or 70 watts.

The key features and benefits of the Philips CDM lamps are as follows:

Product Features

  • Warm or cool white colour tones – choice of 3000 or 4200 Degrees Kelvin
  • Colour rendering good to excellent
  • Allows small-size luminaire designs that give high beam intensities

Product Benefits

  • Stable colour impression over lifetime
  • High lamp efficacy results in low operating costs and low heat generation
  • Long lamp life (up to 12,000 hours) compared with incandescent and halogen lamps
  • Relatively low heat output assists to maintain low lens/trim temperatures in Hunza ST Luminaires
  • All types are UV-Block for reduced fading risks

Product Applications

  • Decorative, outdoor floodlighting
  • Accent and display lighting with a sparkling effect

All CDM lamps require a specific ballast for correct performance and when you order your HUNZA™ ST150 or ST50 luminaire, it will be supplied with the correct ballast for the lamp type specified.

All HUNZA™ ST luminaires use Philips electronic ballasts for the CDM lamps to ensure better lamp life, maximum efficiency and long-term reliability.

Lamp Options

  • G12 35, 70, 150 watt Ceramic Metal Halide lamp (ST150 only)
  • GX8.5 111 35, 70 watt Ceramic Metal Halide lamp (ST150 only)
  • PGJ5 20, 35 watt Ceramic Metal Halide lamp (ST50 only)

Power Supply

Electronic Ballasts for Metal Halide – increase lamp life by 30%, high efficiency.

Input Voltage 220-240v AC 50 Hz, COS0.98

 

 

Philips Mini White SON Lamp (Master SDW-TG White SON)

 

Sodium Mini White SON is one of the two key HID (High Intensity Discharge) lamp type options available for the HUNZA Architectural Series ST150 luminaire, supplied in either 50 or 100 watts.

Landscaping lighting effects can be greatly enhanced by selecting the right colour temperature light source to match the subject. The colour temperature of light is measured in degrees Kelvin, ranging from warm colours in the lower part of the scale, characterised by red and yellow tones, to cooler colours in the upper part of the scale, which tend to be more blue.

The Philips White SON lamp is a very warm light source with a tendency toward the lower (red) end of the Kelvin scale at 2550 Degrees K, therefore it is especially effective at enhancing bricks, sandstone, limestone and trees with brownish bark, which are rich in have reds and yellows.

In addition to the very attractive warm colour temperature, White SON also offers very high energy efficiency and excellent colour rendering features, make it ideal for use in retail display and downlighting applications and it is perfect for highlighting colours and textures in fabrics, flowers, plants, fruits and vegetables.

These lamps do not have an integral reflector so this is supplied as part of the HUNZA™ ST Luminaire, with a range of beam angles from 12 to 60 degrees. This type of lamp/reflector system provides both versatility and economy as the reflector is not replaced at each lamp change.

White SON lamps require a special ballast for correct performance and when you order your HUNZA™ ST150 luminaire, it will be supplied with the correct ballast for the lamp type specified.

To prevent installation of the White SON lamp into the wrong type of ST150, there is a small lug beside one of the contact pins - the new modified caps are classified as types GX12-1 and GX12

Lamp Options

GX12.1 50 or 100 watt Mini White Son (Sodium) lamp

Power Supply

Electronic Ballast for Mini White Son – increase lamp life by 30%, high efficiency.

Input Voltage 220-240v AC 50 Hz, COS0.98

 

 

Metal Halide

 

Hunza offers long-life, low energy ceramic metal halide lamps for selected luminaires.

Metal halide lamps are extremely efficient, using less energy and out-putting 3-4 times more light than an equivalent wattage halogen lamp. For instance, a 20 watt metal halide can produce the same amount of light as a 75 watt halogen lamp, making it suitable for lighting tall trees or structures. Metal halide lamps also have a long 12,000-hour operational life, much higher than the average halogen lamp life of 3000-5000 hours, as well as excellent colour rendition, UV control and a consistent colour over its lifetime.

MR16 metal halide lamps come with a robust GX10 base.

The SafeTouch series uses PGJ5, GX8.5 or G12 metal halide lamps, depending on the model and specification.

HUNZA metal halide luminaires are supplied with electronic ballasts, which deliver 30 percent longer lamp life (increasing lamp life to 15,000 hours) and have excellent “end of life” control of the lamp.

 

 

Fluorescent

 

Selected luminaires are available in fluorescent version, suitable for connection directly to either 240 or 120 volt electrical supply.

The lamp has a medium screw base (E26 or E27) and is rated at 7 or 8 watts.

Fluorescent lamps operate at very low temperatures and are very energy efficient, making them ideal for use in public areas and where safety is paramount.

Typical fluorescent lamp life is 6,000 to 10,000 hours, so maintenance is reduced.

The following luminaires are available in Fluorescent version:

Bollard 700
Floor Lite
Floor Lite Square
Pagoda Lite
Path Lite
Step Lite
Step Lite Square
Step Lite Eyelid
Step Lite Louvre
Step Lite Louvre Square
Step Lite Solid Eyelid
Step Lite Solid Eyelid Square
Step Lite Square on Square
Tier Lite




Halogen

MR16

Many HUNZA luminaires are designed to use the popular MR16 type of low-voltage halogen lamp with built-in reflector. These lamps are available in a range of wattages from 20w to 50w and a choice of 3 beam angles, which includes Narrow Spot (10°), Flood (38°) and Wide Flood (60°). HUNZA MR16 luminaires are supplied with a high quality 5000-hour European lamp.

MR11

HUNZA Euro luminaires are designed for use with the MR11 type of low-voltage halogen lamp with built-in reflector. These lamps are available in either 10W or 20w and a choice of 2 beam angles, which includes Narrow Spot (10°) and Flood (30°).

AR1-11

The HUNZA IG1-11 luminaire is designed to use the AR1-11 type of low-voltage halogen lamp with built-in reflector. These lamps are available in a range of wattages from 50w to 100w and a choice of 3 beam angles, which includes Narrow Spot (8°), Flood (24°) and Wide Flood (45°).

Please note that the HUNZA IG1-11 fixture is no longer supplied with the 100 watt AR1-11 lamp as standard. This lamp has now been replaced with the 60 watt IR (infra-red) lamp, which provides the same light output with lower energy usage and operating temperature.

 

 

Infra Red Halogen

 

HUNZA MR16 luminaires are also available with Osram Infra-Red (IRC) lamps, which provide a 75% improvement in energy efficiency and heat output over standard halogen lamp technology.

This has been achieved by the use of a special coating on the reflector.

Lamp details are as follows:

20w IRC - equivalent to the light output of a 35 watt standard halogen and the heat output of a 20 watt lamp
35w IRC - equivalent to the light output of a 50 watt standard halogen and the heat output of a 35 watt lamp
50w IRC - equivalent to the light output of a 75 watt standard halogen and the heat output of a 50 watt lamp

Beam Angles

Available beam angles in the IRC lamps are as follows: 12, 24 or 36 degree.