In-Ground & Recessed

In-Ground and Recessed

Driveway Lite

The Driveway Lite is mounted flush with the level of a driveway, pathway, hotel floors or building foyers – there is no lip to trip over. It can also be driven over or walked upon without damaging it. The lamp can be directed up at a bush, tree, or the outside of a building, etc. without the need to remove the fitting from the canister, due to the vandal-resistant 3-allen head screw fixing system which attaches the flange to the body of the luminaire.

The luminaire is supplied with a mounting canister that facilitates ease of installation.

The Driveway Lite has a solid bronze or 316 stainless steel flange with a powder coated black body.

The Driveway Lite has a ‘Flush Fit’ 10mm (3/8”) thick tempered glass lens and silicon gasket which stops water pooling and depositing dirt on the lens. The lamp can be aimed up to 20 degrees without removing the fitting from the canister.

Suitable for use with a MR16 20 or 35 watt lamp (20w max. in the USA) and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSLLF, IR Lamp #/IRC, Hex Cell Retainer #HCR

HUNZA offers a comprehensive range of LED options and we regularly update the technology in line with the latest developments. Please refer to the Light Sources section of our website for the most up to date information on LED options for this luminaire.

Power Supply

HUNZA Buriable IG20 or IG50 safety isolating transformer (single installation) or multi installation with IG40, IG100, IG150 or IG200 safety isolating transformers or HUNZA Wall Mount series WM100 – WM300 Double Insulated Safety Isolating Transformers.

Euro Path Lite

The Euro Path Lite is designed for use with a MR11 lamp. This luminaire is ideal for lighting flat areas, decks, paved courtyards or edge lighting paths. The Euro Path Lite has a low profile and directs light horizontally through a frosted glass lens to reduce glare. Availab le with 1, 2, 3 or 4 facets for light to be projected through. The dirt guard has been developed to prevent dirt, mud and grass clippings from entering the optics area. The Euro Path Lite 2 facet may be used as a Step Lite in a wall or fence, etc. to shine light up and down.

Machined from a solid block of copper or 316 stainless steel, frosted tempered glass lens and high temperature silicon gaskets.

Accessories

Cable Joint Kit #CJK150, Euro Floor Canister #Cat. Eflcan, Euro Deck Canister #Cat. Edkcan, Euro Lite Canister #Cat. Elcan, Euro Lite Canister 316 stainless steel #Cat. Elcanss, Euro Hex Cell Louvre #Cat. Ehcl.

Power Supply

HUNZA Inground or Wall Mount Transformer: not included.

Floor Lite

The Floor Lite has an 88mm (3 1/2”) flange which has an extremely low profile and can be walked upon without damaging the luminaire. There are five flange designs: Clover #FLCL, Grill #FLGR, Louvre #FLLU (45 degree angle), Spot #FLSP (spot also avail able in copper), Cross #FLCR.

The luminaire is held into the aluminium mounting canister by two ‘O’ rings that allow the luminaire to be removed for lamp replacement, hence there are no mou

nting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite is machined from 9mm (11/32”) thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets.This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp.

Suitable for use with a MR16 20 watt halogen lamp and is supplied with a high quality European 5000 hour lamp. A GU10 option can be specified with a 25 watt lamp. Note that operating temperature does increase and this changes the luminaire to an IP66 rating.

A 110/240 volt fluorescent option is available, which offers excellent light output, low energy usage and very low heat generation. This option changes the luminaire to an IP66 rating.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSSTEPF, Hex Cell Louvre Adaptor #HCL, Fluorescent Canister PVC #FLUCAN, IR Lamp #/IRC

Power Supply

HUNZA Buriable IG20 safety isolating transformer (single installation) or multi-installation with IG40, IG100, or IG200 safety isolating transformers, HUNZA Wall Mount series WM100 – WM300 Double Insulated Safety Isolating Transformers or H20 for internal installation only.

Floor Lite Dark Lighter

The Floor Lite Dark Lighter has a lamp that is recessed 50mm (2”) below the lens to provide a compact up-lighter with minimal glare. Glare control has been further enhanced by the inclusion of a hex cell louvre and matt black interior. The Dark Lighter version of the Floor Lite has an extremely low profile (3mm or 1/8”) and can be walked on without damaging the luminaire.

There are five flange designs available: Spot #FLDKSP (spot also available in copper), Clover #FLDKCL, Cross #FLDKCR, Grill #FLDKGR and Louvre #FLDKLU (45 degree angle).

The luminaire is supplied with an aluminium mounting canister and a high quality European 5000 hour, 20 watt MR16 lamp to avoid undue heat build-up at the lens surface. The fixture is held into the aluminium mounting canister by two ‘O’ rings, which allow easy removal for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite is machined from 9mm (11/32”) thick 316 stainless steel and has a tempered, stepped glass lens with high temperature silicon gaskets. There is also a solid copper version available with a Spot flange only.

A GU10 option can be specified with a 25 watt lamp – note that operating temperature does increase and this changes the luminaire to an IP66 rating.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSSTEPF, Hex Cell Louvre Adaptor #HCL, Floor Canister 200 #FLCAN200, Fluorescent Canister PVC #FLUCAN, IR Lamp #/IRC

Power Supply

HUNZA Buriable IG20 safety isolating transformer (single installation) or multi-installation with IG40, IG100, or IG200 safety isolating transformers, HUNZA Wall Mount series WM100—WM300 Double Insulated Safety Isolating Transformers or H20 for internal installation only.

Floor Lite Dark Lighter Square

The Floor Lite Dark Lighter Square has a lamp that is recessed 50mm (2”) below the lens to provide a compact up-lighter with minimal glare. Glare control has been further enhanced by the inclusion of a hex cell louvre and matt black interior. The fixture has an extremely low profile (7mm or 1/4”) and can be walked on without damaging the luminaire. There are five flange designs available: Spot #FLDKSPSQ (spot also available in copper), Clover #FLDKCLSQ, Cross #FLDKCRSQ, Grill #FLDKGRSQ and Louvre #FLDKLUSQ (45 degree angle).

A GU10 option can be specified with a 25 watt lamp – note that operating temperature does increase and this changes the luminaire to an IP66 rating

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSSTEPF, Hex Cell Louvre Adaptor #HCL, Fluorescent Canister PVC #FLUCAN, IR Lamp #/IRC

Power Supply

HUNZA Buriable IG20 safety isolating transformer (single installation) or multi- installation with IG40, IG100, or IG200 safety isolating transformers, HUNZA Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers or H20 for internal installation only.

Floor Lite Square

The Floor Lite Square has an 88mm (3 1/2”) flange which has an extremely low profile (3mm or 1/8”) and can be walked upon without damaging the luminaire. There are five flange designs: Clover #FLCLSQ; Grill #FLGRSQ; Louvre #FLLUSQ (45 degree angle); Spot #FLSPSQ (Spot also available in copper); Cross #FLCRSQ. The luminaire is held into the aluminium mounting canister by two ‘O’ rings that allow the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite Square is machined from 9mm (11/32”) thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets. This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp.

Suitable for use with a MR16 20 watt halogen lamp and is supplied with a high quality European 5000 hour lamp.

A 110/240 volt fluorescent option is available, which offers excellent light output, low energy usage and very low heat generation. This option changes the luminaire to an IP66 rating.

A GU10 option can be specified with a 25 watt lamp – note that operating temperature does increase and this changes the luminaire to an IP66 rating.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSSTEPF, Hex Cell Louvre Adaptor #HCL, Fluorescent Canister PVC #FLUCAN, IR Lamp #/IRC

Power Supply

HUNZA Buriable IG20 safety isolating transformer (single installation) or multi-installation with IG40, IG100, or IG200 safety isolating transformers, HUNZA Wall Mount series WM100—WM300 Double Insulated Safety Isolating Transformers or H20 for internal installation only.

Flush Floor Lite

The Flush Floor Lite has been designed to mount flush with the level of a pathway, hotel floor or a building foyer. The ‘Flush Fit’ lens stops water pooling and depositing dirt on the lens. There is no lip to trip over and the luminaire can be driven over or walked upon without being damaged.

There are no holes in the flange to ruin the aesthetics of the luminaire. The luminaire is supplied with a mounting canister that facilitates ease of installation.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSSTEPF, Hex Cell Louvre Adaptor #Cat. HCL, (Note: Supplied as standard for USA/Canada).

Power Supply

HUNZA Inground or Wall Mount Transformer: not included.

Flush Floor Lite Square

The Flush Floor Lite Square has been designed to mount flush with the level of a pathway, hotel floor or a building foyer. The ‘Flush Fit’ lens stops water pooling and depositing dirt on the lens. There is no lip to trip over and the luminaire can be driven over or walked upon without being damaged.

The square shape of The Flush Floor Lite Square makes it ideal for mounting in tiled areas. The Flush Floor Lite Square has a 110mm (4¼) diameter flange. There are no holes in the flange to ruin the aesthetics of the luminaire.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSSTEPF, Hex Cell Louvre Adaptor #Cat. HCL, (Note: Supplied as standard for USA/Canada).

Power Supply

HUNZA Inground or Wall Mount Transformer: not included.

Inground 1-11

The Inground 1–11 is an inground up-lighter that sits flush with the level of the ground, driveway, pathway, hotel floors or building foyers, so there is no lip to trip over. The IG1–11 is ideal for lighting large trees, palms, columns and buildings etc.

The luminaire can be driven over (10kph or 6mph max) or walked upon without damaging it. The Luminaire has a ‘flush fit’ 10mm (3/8”) thick glass lens which stops water pooling and depositing dirt on the lens.

Solidly constructed from a cast aluminium UV stable powder coated body, with heat dissipation fins to lower operating temperature.

The fitting is available with either a solid bronze or 316 stainless steel flange.

The Inground 1–11 is suitable for use with 50w, 75W standard halogen and 60W IRC (equivalent to 100w) lamps, which have a range of beam angles from 4 to 45 degrees. It comes complete with its own 120/240 volt ac integral power supply and thermal overload, which is also dimmable. A 12 volt version for use with a remote transformer is also available.

Designed so the lamp can be directed (up to 20 degrees) without the need to remove the luminaire from the canister due to the vandalresistant 4-allen head screw fixing system which attaches the flange to the body of the luminaire.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSAR111F, Protective Grille #IGGRILL

Power Supply

Integral 110/240 volt transformer

Inground 1-11 (12 volts)

The Inground 1-11 12 volt is suitable for use with 50, 75 and 100 watt lamps which have a range of beam angles from 4 to 45 degrees. The AR1-11 lamp has very low glare output due to the dome covering the halogen capsule. The luminaire can be driven over at 10km/h max (6mph) with a maximum vehicle weight of 1500kg (3000lbs) or walked upon without being damaged. The fixture also has a ‘flush fit’ 10mm (3/8") thick glass lens which stops water pooling and depositing dirt on the lens.

Solidly constructed from a cast aluminium UV stable powder coated body, with heat dissipation fins to lower operating temperature.

The fitting is available with either a solid bronze or 316 stainless steel flange.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSAR111F, Protective Grille #IGGRILL, Linear Spread Lens #LENSSPREAD

Inground 1-11 GM

The Inground 1–11gm is a MR16 version of the IG1–11 uplighter that has a fully adjustable gimbal. This luminaire is suitable for use with MR16 lamps up to 75 watts and is supplied complete with a hex cell louvre and slot for mounting colour and linear spread lenses.

The Inground 1–11gm has an integral 120 or 240 volt ac transformer, which is dimmable. It is also available in a 12 volt version for use with a remote power supply.

The luminaire can be driven over at up to 10kph (6 mph) with a maximum vehicle weight of 1500kg (3000lbs). It can also be walked upon without causing damage.

The luminaire is supplied with a ‘Flush Fit’ stepped lens which prevents water pooling and depositing dirt on the lens. The Inground 1–11gm is supplied complete with a PVC mounting canister. The luminaire has a heavy duty cast aluminium body and a choice of 316 stainless steel or solid bronze flange.

The lamp can be directed up to 45 degrees from horizontal and rotated 360 degrees without the need to remove the fitting from the canister due to the vandal-resistant four allen-head screw fixing system which attaches the flange to the body of the luminaire.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSAR111F, Protective Grille #IGGRILL, Linear Spread Lens #LENSSPREAD.

Power Supply

Integral 110/240 volt transformer.

Inground 1-11 Metal Halide

The Inground 1–11 Metal Halide uses a 20 or 35 watt MR16 Metal Halide lamp with an integral, electronic ballast. This luminaire is designed to be installed as a flush-mount recessed uplighter and is ideal for use in concrete or stone materials. It is supplied with a canister for easy mounting and provides 360 degree rotation and up to 35 degree elevation adjustment.

The Metal Halide lamp is extremely efficient, using considerably less energy and outputting 3-4 times the light of a halogen lamp. It also has a long 15,000 hour operational life, much higher than the average halogen lamp life.

Suitable for drive over, up to 10 km/h (6 mph), max. vehicle weight 1500kg (3300lb).

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSAR111F, Linear Spread Lens #LENSSPREAD.

Power Supply

Ballast built in: 120 volt AC 60 Hz

Lawn Lite

The Lawn Lite is designed for insertion into a lawn or garden bed and can be mowed over without any damage being caused. Designed so the lamp can be directed up at a bush, tree, or the outside of a building, etc. without the need to remove the fitting from the canister, due to the vandal-resistant 3-allen head screw fixing system which attaches the flange to the body of the luminaire.

This luminaire has either a solid bronze, 316 stainless steel, or a UV stable powder coated aluminium flange with a powder coated black body.

This luminaire has a 10mm (3/8”) thick tempered ‘Flush Fit’ glass lens which stops water pooling and depositing dirt on the lens. Solidly constructed body cast from aluminium with UV stable powder-coat. The lamp can be aimed up to 20 degrees without removing the fitting from the canister.

Suitable for use with MR16 20 or 35 watt lamp and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSLLF, IR Lamp #/IRC, Hex Cell Retainer #HCR

Power Supply

Lawn Lite Deck Mount

The Lawn Lite Deck Mount version is an uplighter for installation in timber decks. Designed so the lamp can be directed up at a bush, tree, or the outside of a building, etc. without the need to remove the fitting from the canister, due to the vandal-resistant 3-allen head screw fixing system which attaches the flange to the body of the luminaire.

The fixture has a solid bronze or 316 stainless steel flange with a powder coated black body. This luminaire has a 10mm (3/8”) thick tempered ‘Flush Fit’ glass lens which stops water pooling and depositing dirt on the lens. The Lawn Lite Deck Mount version has a solidly constructed body cast from aluminium with UV stable powder coat. The lamp can be aimed up to 20 degrees without removing the fitting from the
canister.

Suitable for use with a MR16 20 or 35 watt lamp and is supplied with a high quality European 5000 hour lamp.

Note: Deck Lite is not suitable for driving over.

Lifetime Warranty on Lens Breakage.

Accessories

Cable Joint Kit #CJK150, Frosted Lens #LENSLLF, IR Lamp #/IRC, Hex Cell Retainer #HCR

Power Supply

Path Lite

The Path Lite is ideal for lighting flat areas, decks, paved courtyards or edge lighting paths. This luminaire has a low profile (20mm or 3/4” high) and directs light horizontally through a frosted glass lens to reduce glare.

Available with a choice of either 1, 2, 3 or 4 facets depending on the light pattern required.

The Path Light 2-facet version may be used as a Step Lite in a wall or fence to shine light up and down.

Machined from a solid block of copper or 316 stainless steel with frosted tempered glass lens and high temperature silicon gaskets. For use with a MR16 20 watt lamp and is supplied with a high quality European 5000 hour lamp.

A 110/240 volt fluorescent option is available, which offers excellent light output, low energy usage and very low heat generation. This option changes the luminaire to an IP66 rating. There is also the option of a long-life, low heat LED lamp, suitable for connection to a standard low voltage transformer.

A GU10 option can be specified with a 25 watt lamp – note the operating temperature does increase and this changes the luminaire to an IP66 rating.

Path Lite Static Load Rating (316 Stainless Steel)

Path Lite Single Facet (PL1-90 SS) - Suggested Rating: 3500kg (7716lb)
Path Lite Two Facet 180 degree (PL1 SS) - Suggested Rating: 2650kg (5842lb)
Path Lite Two Facet 90 degree (PL2 SS) - Suggested Rating: 2000kg (4409lb)
Path Lite Three Facet (PL3 SS) - Suggested Rating: 1900kg (4189lb)
Path Lite Four Facet (PL4 SS) - Suggested Rating: 1700kg (3748lb)

Accessories

Cable Joint Kit #CJK150, Deck Canister #DKCAN, Floor Lite Canister #FLCAN, or #CANSS (316 stainless), Fluorescent Option #FL, Fluorescent Canister PVC #FLUCAN, IR Lamp #/IRC

Power Supply

HUNZA Buriable IG20 safety isolating transformer (single installation), multi installation with IG40, IG100 or IG200 safety isolating transformers or HUNZA Wall Mount series WM100 - WM300 Double Insulated Safety
Isolating Transformers.

SafeTouch 150™

The HUNZA™ SafeTouch™ 150 inground uplighter has been designed and developed not only to produce optically pure light but also to achieve the lowest possible operating temperatures and energy consumption.

This luminaire is extremely tough, durable and waterproof, making it ideal for installation in public spaces and large-scale projects.

Public safety is the primary objective in the construction of SafeTouch™ 150. A revolutionary, new mounting canister substantially increases heat transfer into the ground rather than the luminaire, allowing all exposed surfaces to operate at the coolest possible temperature. This canister provides solid and secure mounting for the luminaire as well as an effortless installation system for the contractor.

Energy conservation is paramount. SafeTouch™ 150 metal halide luminaires feature the exclusive use of electronic ballasts to produce minimal heat with maximum energy efficiency and reliability. Electronic ballasts deliver 30% longer lamp life and have a significantly better ‘end of life’ control of the lamp compared with magnetic ballasts.

The SafeTouch™ 150 range offers many choices of light source, including metal halide, mini white son (sodium) and halogen. Accessories include coloured lenses, asymmetric lenses and hex louvres.

Luminaire Construction:

Body

Cast from virgin, high corrosion resistant, very low copper aluminium alloy, with anti-corrosion layer, epoxy water-resistant layer and high UV-resistant polyester powder coat top layer. Anti-Syphon fitted. Colour: Black

Flange

The flange is attached to the body by five 316 stainless steel allen-head, vandal-resistant screws with anti-gall threaded inserts and is machined from either Solid Bronze or 316 Stainless Steel.

Flange Dimensions – 260mm x 6mm (10 ¼” x ¼”)

Flange Finishes – Natural Bronze, High Polish or Machined Finish Stainless Steel

Mounting

The luminaire is supplied with a self-adjusting, heat-dissipating mounting canister designed to be cast in the ground or into concrete. Maximum drive over speed is 10 kph (6 mph) and maximum weight 2000 kg (4400 lb).

Lens

Multi-lens system for heat minimisation, using 12mm (1/2”) flush-fit, extra clear, low-iron, tempered, shatter-resistant glass.

Gasket

Moulded silicone, high temperature 220° c (428°f)

Lamp Options

G12 35, 70, 150 watt Ceramic Metal Halide lamp
GX12.1 50 or 100 watt Mini White Son (Sodium) lamp
GX8.5 111 35, 70 watt Ceramic Metal Halide lamp
GU5.3 30, 45, 60 watt IR Halogen Lamp

Reflector Angles

2 x 6 degree (12 degree)
2 x 12 degree (24 degree)
2 x 18 degree (36 degree)
2 x 30 degree (60 degree)

Lamp Adjustment

20 degrees tilt with position lock
360 degrees rotation with position lock

Maximum Lens Operating Temperatures

35 Watt Metal Halide: 46.0°c (115.0°f)*
70 Watt Metal Halide: 55.0°c (131.0°f)*
150 Watt Metal Halide: 80.0°c (176.0°f)*
50 Watt Mini White SON: 49.0°c (120.0°f)*
100 Watt Mini White SON: 65.0°c (149.0°f)*

*Luminaires are tested in 39° C dry sand for a period of 8 hours. Temperature reading is taken at the centre of the lens.

Power Supply

Electronic Ballasts for Metal Halide and Mini White Son – increase lamp life by 30%, high efficiency HUNZA™ Electronic Transformer for Halogen.

Input Voltage 220-240v AC 50 Hz, COS0.98

Accessories

Cable Joint Kit (CJK150)
Frosted Lens (ST150FL)
Hex Cell Louvre (ST150HC)
Anti-Slip Lens (ST150AS)
Asymmetric Lens (ST150AL)
Colour Filters – Blue, Red, Yellow, Green

SafeTouch 50™

The HUNZA™ SafeTouch™ 50 inground uplighter is a more compact version of the ST150, designed and developed not only to produce optically pure light but also to achieve the lowest possible operating temperatures and energy consumption.

This luminaire is extremely tough, durable and waterproof, making it ideal for installation in public spaces and large-scale projects.

Public safety is the primary objective in the construction of SafeTouch™ 50. A revolutionary, new mounting canister substantially increases heat transfer into the ground rather than the luminaire, allowing all exposed surfaces to operate at the coolest possible temperature. This canister provides solid and secure mounting for the luminaire as well as an effortless installation system for the contractor.

Energy conservation is paramount. SafeTouch™ 50 metal halide luminaires feature the exclusive use of electronic ballasts to produce minimal heat with maximum energy efficiency and reliability. Electronic ballasts deliver 30% longer lamp life and have a significantly better ‘end of life’ control of the lamp compared with magnetic ballasts.

The SafeTouch™ 50 range offers many choices of light source, including metal halide, mini white son (sodium) and halogen. Accessories include coloured lenses, asymmetric lenses and hex louvres.

Luminaire Construction:

Body

Flange

The flange is attached to the body by three 316 stainless steel allen-head, vandal-resistant screws with anti-gall threaded inserts and is machined from either Solid Bronze or 316 Stainless Steel.

Flange Dimensions – 175mm x 6mm (6 7/8” x ¼”)

Mounting

Lens

Multi-lens system for heat minimisation, using 12mm (1/2”) flush-fit, extra clear, low-iron, tempered, shatter-resistant glass.

Gasket

Moulded silicone, high temperature 220°c (428°f)

Lamp Options

PGJ5 20, 35 watt Ceramic Metal Halide lamp
GU5.3 20, 35, 50 watt IR Halogen Lamp

Reflector Angles

2 x 6 degree (12 degree)
2 x 18 degree (36 degree)
2 x 30 degree (60 degree)

Lamp Adjustment

20 degrees tilt with position lock
360 degrees rotation with position lock

Maximum Lens Operating Temperatures

20 Watt Metal Halide: 54.0°c (129.0°f)*
35 Watt Metal Halide: 62.5°c (144.0°f)*
45 Watt Halogen IRC: 65.0°c (149.0°f)*

Luminaires are tested in 39° C dry sand for a period of 8 hours. Temperature reading is taken at the centre of the lens.

Power Supply

Electronic Potted Ballasts for Metal Halide – increase lamp life by 30%, high efficiency HUNZA™ Potted Electronic Transformer for Halogen.

Input Voltage 220-240v AC 50 Hz, COS0.98 (110/270 volt power supplies due in 2010)

Accessories

Cable Joint Kit (CJK150)
Frosted Lens (ST50FL)
Hex Cell Louvre (ST50HC)
Anti-Slip Lens (ST50AS)
Asymmetric Lens (ST50AL)
Colour Filters – Blue, Red, Yellow, Green