• 
• 

CAST Complete Landscape Lighting Tool Kit (CL-CTOOLKIT)

This toolkit contains a selection of the tools essential for landscape lighting installation and testing.

CAST Digital Amp/Volt/Ohms Meter (CL-CMETER)

The CAST Digital Amp/Volt/Ohm Meter is the only reasonably priced meter calibrated for maximum accuracy at 12V AC - specifically engineered for landscape lighting applications.
The meter measures amperage, voltage and resistance.
On the back of the meter, a sticker lists maximum amperage capacity of landscape lighting wire types.
Includes test leads, carrying case and operating manual.

CAST MR-16 Voltage Testing Tool (CL-CTESTMR16)

This tool is a CAST-exclusive and allows you to test voltage at an MR-16 socket under full-load.

CAST S8 (wedge-base Voltage Testing Tool) (CL-CTESTS8)

This tool, a CAST-exclusive, allows you to test the voltage at an S-8 socket under full load.

Transformer Installation Test Lug (CL-CTESTLUG)

The CAST Transformer Test Lug has two purposes:

1. To allow the installer to connect all wire runs to the 12-volt tap during the initial voltage testing step.
2. In the event that the installation requires a large number of wires to connect to any one voltage terminal, this tool can be permanently installed to accommodate that.

CAST Wire Spinner Dispenser (CL-CSPIN)

Wood and steel turntable engineered to hold and release a single 500' wire spool.
400 lb. capacity.

CAST Lamp Organizer (CL-CLAMPO)

Wood and steel turntable engineered to hold and release a single 500' wire spool.
400 lb. capacity.

CAST Wire Labeling Pad (CL-CMPAD)

Every installer should label both ends of every wire. This wire labeling pad provides 10 pages of numbers 0 - 9.

Wire Trenching Tool (CL-CWTT)

The CAST Wire Trenching Tool is the ideal tool to open up trenches for landscape lighting wiring.
The tool creates a V-shaped trench about 8" deep - perfect for the 6" burial depth required by the NEC.

Black/Blue Waterproof Wire Nut (CL-C61335)

King DryConn® Large Black/Blue waterproof connector with silicone sealant.

• UL designation: KB
• UL 50 tested for watertight/raintight applications
• UL listed and CSA certified as a Pressure Type Connector

Suitable for low voltage applications.
CAST Spider Splice Box (CSS1) contains one pair of this item.

CAST Ideal Automatic Wire Stripper (CL-CASTRIP1)

CAST Automatic Wire Strippers are the best way to ensure quick and clean removal of stranded wire insulation without cutting or nicking strands.
Strips #8 to #30 wire gauges.
Cushioned non-slip handle.

CAST Ideal Manual Wire Stripper (CL-CMSTRIP1)

The CAST Ideal Manual Stripper is an economical alternative to the CAST Automatic Wire Stripper.
It strips #8/2 to #16/2 stranded wire types.