Alliance Accessories

• 
• 

Digital Timer

Features:

• Up to 8 ON/OFF switches per day
• Option to program individual days or up to 8 different weekday groups
• Summer/Winter time changeover
• Easy to read LCD display
• Countdown feature
• Manual override button
• Rechargeable battery back-up

Specifications:

• Input – AC 125V 60Hz
• Operating temperature: -10degree °C to 40 degree °C
• Min setting time: 1 minute
• Back Up Battery: Rechargeable Battery
• Horse Power: 1 HP

Mechanical Timer

Specifications/Features:

• Up to 2-on and 2-off settings per day
• Manual On/Off thumb switch
• Internal components are designed to operate at higher temperatures than indoor rated timers
• 125VAC, 60 Hertz, 9.5 Amps
• Resistive or inductive load
• Ambient operating temperature: -20°F to 140°F

CS100 Connection Point/Hub

Specifications/Features:

• Two brass connectors with set screws providing a tight, secure connection
• Two pre-greased plastic lug caps,
• Pre-greased for easy and clean application. Provides protection from nature's elements for your connection points
• PVC tube for protection from ground erosion ABS cap labeled "Low Voltage Lighting Connection"

CS150 Connector Set

Specifications/Features:

• Two brass connectors with set screws providing a tight, secure connection
• Two pre-greased plastic lug caps,
• Pre-greased for easy and clean application. Provides protection from nature's elements for your connection points

Guttermount

• Aged Brass Guttermount
• Lifetime warranty

Photocell

Specifications/Features:

• Swivel-mount unit with ability to turn and adjust position relative to the sun rays
• Includes sliding shield for adjustment of light sensitivity
• Equipped with 1/2"-14 threaded stem, washer gasket, and locking nut
• Male plug connection fitting ALLIANCE transformers, allowing for fast connection and replacement of the photo control
• Female transformers harness is hard-wired inside every ALLIANCE transformer

Alliance Photocell is compatible with the following:

• AL-XF300 [300 Watt Transformer]
• AL-XF600 [600 Watt Transformer]
• AL-XF900 [900 Watt transformer]
• AL-XF1200 [1200 Watt Transformer]

Digital Amperage Clamp Meter

A tool that all landscape lighting contractors must have to properly test amperage and voltage. This meter accurately reads the AC amps when electrical current (wire) is clamped completely around the easy-to-open clamp. This vital electrical tool is ideally suited for the contractor to check primary amps on the transformer and the secondary amps of each individual wire run.

The Amperage Clamp Meter has multiple settings which will deliver results with different decimal readings for all ranges of electrical applications.

The Amperage Clamp Meter is also a dual meter because it includes two plug-in probes to test voltage. By simply moving the dial to AC Volts and pluging the red and black probe into the meter, the contractor can now measure the voltage of either the primary or secondary side of the system. This dual meter is the basic, must-have tool for all lighting professionals.